Tamagotchi Secret Characters
In Tamagotchi, there are many secret characters that May Be obtained by good care, by using a certain item, or by debugging your Tamagotchi.
- Bill - A tamagotchi that drinks a lot of CoFFEE.
- Zachi - A tamagotchi that looks like an alien.
- Oyajitchi - Drinks lots of coffee
- Unchi-Kun
- Futagotenshi
- Sabotenshi
- Smiling Angel
- Otonoten
- Debirutchi
- Ojitchi - The grandfather tamagotchi doesn't like losing to younger tamagotchis.
- Otokitchi - The grandmother tamagotchi you might know her as the matchmaker or Mrs.Busybody.
- Sekitoritchi
- Charitchi
- Paparatchi
- TripoKakutchi
- Tamagotchi
- Bogatchi
- And 37 Unnamed Ones
How to Debug a Tamagotchi
Question: What is debugging, and what does it let you do? Answer: Debugging means going into a computer and fixing a bug in the circuit boards. Doing this on a Tamagotchi allows for you to choose what character you like most, and also to live in hyperspeed (one day= AbOUT one to two minutes if stopped twice)
- Disclaimer: Debugging is only for Tamagotchi Connection and Tamagotchi Plus editions, this does not work on Tamagotchi Connection or 1990's editions. You also might break your Tamagotchi forever.
- Second disclaimer: Debugging a V3 Connection does not allow you to enter passwords or create a username.
1. Screw off the lid as if you are changing the battery. 2. Using a smaller screwdriver, unscrew the four smaller screws. If you did this right you should be able to see the circuit boards. 3. Take out the battery, and look to the lower left of where it was. You should see two semi circles if you have a Connection, two squares for Plus. Using a pencil, scratch it two to four times. 4. Put it back together and put the battery back in. Turn it over so you can see an egg on the screen. If it is not bouncing fast, repeat steps 1 to 4. 5. Start it off as you normally would. 6. It should hatch immeadietly after setting your birthday or username. After, to choose your characters, press the "A" button to scroll through and "B" to select it. From now on, you also can press the "C" button so it can live in hyperspeed.