List of ASTM International standards

This is a list of ASTM International standards, current and withdrawn.

A

• ASTM A36 Standard Specification for Carbon Structural Steel
• ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A228 Standard Specification for Steel Wire, Music Spring Quality
• ASTM A297 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
• ASTM A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength
• ASTM A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints
• ASTM A500 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• ASTM A514 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
• ASTM A517 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
• ASTM A743 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
• ASTM A992 Standard Specification for Structural Steel Shapes

B

B1-01(2007) Standard Specification for Hard-Drawn Copper Wire

B2-08 Standard Specification for Medium-Hard-Drawn Copper Wire

B3-01(2007) Standard Specification for Soft or Annealed Copper Wire

B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

B6-08 Standard Specification for Zinc

B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

B9-90(2008) Standard Specification for Bronze Trolley Wire

B16/B16M-05 Standard Specification for Free-[...] Brass Rod, Bar and Shapes for Use in Screw Machines

B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes

B22-08 Standard Specification for Bronze Castings for Bridges and Turntables

B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")

B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings

B29-03 Standard Specification for Refined Lead

B30-09 Standard Specification for Copper Alloys in Ingot Form

B30-08a Standard Specification for Copper Alloys in Ingot Form CHINESE TRANSLATION

B32-08 Standard Specification for Solder Metal

B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes

B36/B36M-08a Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

B37-08 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

B39-79(2008) Standard Specification for Nickel

B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes

B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes

B47-95a(2007) Standard Specification for Copper Trolley Wire

B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

B49-08a Standard Specification for Copper Rod Drawing STOCK for Electrical Purposes

B61-08 Standard Specification for Steam or Valve Bronze Castings

B62-09 Standard Specification for Composition Bronze or Ounce Metal Castings

B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

B66/B66M-06e1 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

B67-05 Standard Specification for Car and Tender Journal Bearings, Lined

B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed

B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]

B69-08 Standard Specification for Rolled Zinc

B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

B75-02 Standard Specification for Seamless Copper Tube

B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]

B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

B80-07 Standard Specification for Magnesium-Alloy Sand Castings

B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

B85/B85M-08 Standard Specification for Aluminum-Alloy Die Castings

B86-08 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

B88-03 Standard Specification for Seamless Copper Water Tube

B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]

B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate

B91-07 Standard Specification for Magnesium-Alloy Forgings

B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting

B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

B94-07 Standard Specification for Magnesium-Alloy Die Castings

B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

B98/B98M-08 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications

B100-08 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings

B103/B103M-09 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

B106-08 Standard Test Methods for Flexivity of Thermostat Metals

B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings

B111/B111M-09 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

B115-00(2004) Standard Specification for Electrolytic Copper Cathode

B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage

• ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

B122/B122M-08 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

B124/B124M-08a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups

B130-08 Standard Specification for Commercial Bronze Strip for Bullet Jackets

B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups

B134/B134M-08 Standard Specification for Brass Wire

B135-08a Standard Specification for Seamless Brass Tube

B135M-08a Standard Specification for Seamless Brass Tube [Metric]

B136-84(2008)e1 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes

B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings

B150/B150M-08 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

B152/B152M-06ae1 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

B159/B159M-05 Standard Specification for Phosphor Bronze Wire

B160-05e1 Standard Specification for Nickel Rod and Bar

B161-05e1 Standard Specification for Nickel Seamless Pipe and Tube

B162-99(2005)e1 Standard Specification for Nickel Plate, Sheet, and Strip

B163-08 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

B164-03(2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

B166-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire

B167-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube

B168-08 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip

B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

B171/B171M-09 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

B176-08 Standard Specification for Copper-Alloy Die Castings

B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating

B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating

B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube

B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

B193-02(2008) Standard Test Method for Resistivity of Electrical Conductor Materials

B194-08 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar

B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire

B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings

B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings CHINESE TRANSLATION

B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]

B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]

B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]

B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

B213-03 Standard Test Method for Flow Rate of Metal Powders

B214-07 Standard Test Method for Sieve Analysis of Metal Powders

B215-08 Standard Practices for Sampling Metal Powders

B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]

B221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

B223-08 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

B224-04 Standard Classification of Coppers

B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors

B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes

B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

B237-01(2006) Standard Specification for Refined Antimony

B240-07e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating

B243-09 Standard Terminology of Powder Metallurgy

B244-09 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]

B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire

B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating

B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel

B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors

B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors

B271-08 Standard Specification for Copper-Base Alloy Centrifugal Castings

B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought

B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides

B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials

B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

B280-08 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

B281-88(2008) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

B283-09 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides

B296-03(2008) Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

B299-08 Standard Specification for Titanium Sponge

B301/B301M-08 Standard Specification for Free-[...] Copper Rod, Bar, Wire, and Shapes

B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes

B306-09 Standard Specification for Copper Drainage Tube (DWV)

B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

B311-08 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens

B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube

B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating

B320-60(2008) Standard Practice for Preparation of Iron Castings for Electroplating

B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating

B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

B327-09 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings

B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds

B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

B333-03(2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

B335-03(2008) Standard Specification for Nickel-Molybdenum Alloy Rod

B338-09 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

B339-00(2005) Standard Specification for Pig Tin

B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel

B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

B348-09 Standard Specification for Titanium and Titanium Alloy Bars and Billets

B349/B349M-09 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

B351/B351M-08e1 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

B362-91(2008) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

B364-96(2009) Standard Specification for Tantalum and Tantalum Alloy Ingots

B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

B367-09 Standard Specification for Titanium and Titanium Alloy Castings

B368-09 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

B369-09 Standard Specification for Copper-Nickel Alloy Castings

B370-09 Standard Specification for Copper Sheet and Strip for Building Construction

B371/B371M-08 Standard Specification for Copper-Zinc-Silicon Alloy Rod

B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

B373-00(2006) Standard Specification for Aluminum Foil for Capacitors

B374-06 Standard Terminology Relating to Electroplating

B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes

B380-97(2008)e1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

B381-09 Standard Specification for Titanium and Titanium Alloy Forgings

B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

B388-06 Standard Specification for Thermostat Metal Sheet and Strip

B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides

B391-03 Standard Specification for Niobium and Niobium Alloy Ingots

B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

B395/B395M-08 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

B400-08 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

B403-07 Standard Specification for Magnesium-Alloy Investment Castings

B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides

B407-08a Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

B411/B411M-08 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

B413-97a(2008) Standard Specification for Refined Silver

B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire

B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

B418-08 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

B422-08a Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube

B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip

B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar

B427-02 Standard Specification for Gear Bronze Alloy Castings

B428-09 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry

B432-09 Standard Specification for Copper and Copper Alloy Clad Steel Plate

B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

B438-08 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

B439-08 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

B440-00(2005) Standard Specification for Cadmium

B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

B446-03(2008) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar

B447-07 Standard Specification for Welded Copper Tube

B449-93(2004) Standard Specification for Chromates on Aluminum

B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application

B453/B453M-08 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive

B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip

B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe

B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube

B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe

B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes

B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging

B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

B477-97(2008) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy

B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals

B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

B481-68(2008) Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

B482-85(2008) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications

B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

B490-09 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

B493/B493M-08 Standard Specification for Zirconium and Zirconium Alloy Forgings

B494/B494M-08 Standard Specification for Primary Zirconium

B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots

B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts

B498/B498M-08 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

B499-09 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

B500/B500M-09 Standard Specification for Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors

B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced

B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

B505/B505M-08a Standard Specification for Copper Alloy Continuous Castings

B506-09 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

B507-86(2008)e1 Standard Practice for Design of Articles to Be Electroplated on Racks

B508-08 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

B516-03(2009) Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes

B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds

B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens

B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces

B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics

B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

B540-97(2008) Standard Specification for Palladium Electrical Contact Alloy

B541-01(2006) Standard Specification for Gold Electrical Contact Alloy

B542-07 Standard Terminology Relating to Electrical Contacts and Their Use

B543-07e1 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin

B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)

B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

B552-08 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

B557M-07e1 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]

B558-79(2008) Standard Practice for Preparation of Nickel Alloys for Electroplating

B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

B560-00(2005) Standard Specification for Modern Pewter Alloys

B561-94(2005) Standard Specification for Refined Platinum

B562-95(2005) Standard Specification for Refined Gold

B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

B564-06a Standard Specification for Nickel Alloy Forgings

B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

B566-04a Standard Specification for Copper-Clad Aluminum Wire

B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

B569-09 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod

B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip

B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials

B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings

B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum

B581-02(2008) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

B582-07 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications

B584-08a Standard Specification for Copper Alloy Sand Castings for General Applications CHINESE TRANSLATION

B587-08 Standard Specification for Welded Brass Tube

B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

B589-94(2005) Standard Specification for Refined Palladium

B591-09 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications

B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts

B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material

B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

B599-92(2009)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast

B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

B604-91(2008) Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

B606-08 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

B607-91(2008) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

B608-07 Standard Specification for Welded Copper-Alloy Pipe

B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

B610-08 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides

B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

B616-96(2006) Standard Specification for Refined Rhodium

B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy

B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings

B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

B620-03(2008) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip

B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy

B629-77(2008) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium

B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials

B632/B632M-08 Standard Specification for Aluminum-Alloy Rolled Tread Plate

B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

B637-06e1 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service

B639-02(2008) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube

B644-05 Standard Specification for Copper Alloy Addition Agents

B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys

B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots

B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire

B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides

B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

B659-90(2008)e1 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

B661-06 Standard Practice for Heat Treatment of Magnesium Alloys

B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material

B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material

B664-90(2006) Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products

B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube

B670-07 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

B671-81(2005) Standard Specification for Refined Iridium

B672-02(2007) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

B675-02(2007) Standard Specification for UNS N08367 Welded Pipe

B676-03(2009) Standard Specification for UNS N08367 Welded Tube

B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products

B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use

B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors

B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material

B684-97(2008) Standard Specification for Platinum-Iridium Electrical Contact Materials

B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material

B686/B686M-08 Standard Specification for Aluminum Alloy Castings, High-Strength

B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

B688-96(2009) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

B689-97(2008) Standard Specification for Electroplated Engineering Nickel Coatings

B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

B692-90(2006) Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material

B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials

B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited

B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

B699-86(2008) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

B700-08 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material

B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter

B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

B709-04(2009) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip

B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials

B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications

B717-96(2006) Standard Specification for Refined Ruthenium

B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument

B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating

B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

B730-08 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

B731-96(2006) Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

B734-97(2008) Standard Specification for Electrodeposited Copper for Engineering Uses

B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock

B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

B739-03(2008) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material

B743-06 Standard Specification for Seamless Copper Tube in Coils

B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

B750-08 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

B751-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

B753-07 Standard Specification for Thermostat Component Alloys

B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

B760-07 Standard Specification for Tungsten Plate, Sheet, and Foil

B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

B763-08a Standard Specification for Copper Alloy Sand Castings for Valve Applications

B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

B765-03(2008) Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

B766-86(2008) Standard Specification for Electrodeposited Coatings of Cadmium

B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

B769-07 Standard Test Method for Shear Testing of Aluminum Alloys

B770-08 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

B773-96(2008) Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies

B774-00(2005)e1 Standard Specification for Low Melting Point Alloys

B775-08 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

B777-07 Standard Specification for Tungsten Base, High-Density Metal

B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material

B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

B786-08 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

B792-08 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

B793-08 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements

B795-07 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

B796-07 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications

B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts

B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers

B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

B802/B802M-08 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

B803-08 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications CHINESE TRANSLATION

B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

B809-95(2008) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”

B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

B812-96(2008) Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

B813-00(2009) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

B817-08 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components

B818-03(2008) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems

B820-09 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts

B824-09 Standard Specification for General Requirements for Copper Alloy Castings

B824-04 Standard Specification for General Requirements for Copper Alloy Castings CHINESE TRANSLATION

B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

B829-04a(2009) Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

B830-97(2003) Standard Specification for Uniform Test Methods and Frequency

B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

B832-93(2008) Standard Guide for Electroforming with Nickel and Copper

B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method

B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits

B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material

B845-97(2008)e1 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

B846-06a Standard Terminology for Copper and Copper Alloys

B846-06a Standard Terminology for Copper and Copper Alloys CHINESE TRANSLATION

B848-05 Specification for Powder Forged (P/F) Ferrous Materials

B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

B852-08 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences

B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel

B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

B857-09 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

B860-09 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe

B862-09 Standard Specification for Titanium and Titanium Alloy Welded Pipe

B863-09 Standard Specification for Titanium and Titanium Alloy Wire

B864/B864M-08 Standard Specification for Corrugated Aluminum Box Culverts

B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

B866-95(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

B867-95(2008) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

B868-96(2008) Standard Practice for Contact Performance Classification of Electrical Connection Systems

B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

B870-08 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products

B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

B874-96(2008) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

B875-96(2008) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

B877-96(2008) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

B878-97(2009) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

B879-97(2008)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

B880-03(2008) Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products

B882-05 Specification for Pre-Patinated Copper for Architectural Applications

B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

B885-09 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

B886-03(2008) Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

B887-03(2008)e1 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

B888-08 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins

B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

B893-98(2008) Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution

B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot

B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate

B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys

B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

B908-03(2008) Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire

B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)

B912-02(2008)e1 Standard Specification for Passivation of Stainless Steels Using Electropolishing

B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

B914-03(2008) Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

B917/B917M-08 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

B918/B918M-09 Standard Practice for Heat Treatment of Wrought Aluminum Alloys

B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

B921-08 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

B922-02(2008) Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

B927/B927M-08a Standard Specification for Brass Rod, Bar, and Shapes

B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts

B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip

B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials

B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials

B936-08 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)

B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials

B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations

B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers

B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products

B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate

B949-08 Standard Specification for General Requirements for Zinc and Zinc Alloy Products

B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys

B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

B952-08 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry

B955/B955M-08 Standard Specification for Aluminum-Alloy Centrifugal Castings

B956-07e2 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

B957-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

B958-08 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

B960-08 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application

B962-08 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

B967/B967M-09 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

C

• ASTM C 1112
• ASTM C 1270
• ASTM C 1349

D

• ASTM D1746
• ASTM D5800
• ASTM D6751
• ASTM D7240
• ASTM D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

E

• ASTM E 1714
• ASTM E 2395
• ASTM E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment

F

• ASTM F568M
• ASTM F 571
• ASTM F 626
• ASTM F 883
• ASTM F 1450
• ASTM F 1577
• ASTM F 1592
• ASTM F 1643
• ASTM F 1712
• ASTM F 1915
• ASTM F 2248
• ASTM F 2322
• ASTM F 2348

G

• G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
• G2 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C]or in Steam at 750°F [400°C]
• G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
• G4 Standard Guide for Conducting Corrosion Tests in Field Applications
• G5 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
• G6 Test Method for Abrasion Resistance of Pipeline Coatings
• G7 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
• G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
• G9 Standard Test Method for Water Penetration into Pipeline Coatings
• G10 Standard Test Method for Specific Bendability of Pipeline Coatings
• G11 Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
• G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
• G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
• G15 Standard Terminology Relating to Corrosion and Corrosion Testing
• G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data
• G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
• G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
• G19 Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
• G20 Standard Test Method for Chemical Resistance of Pipeline Coatings
• G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
• G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
• G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
• G29 Standard Practice for Determining Algal Resistance of Plastic Films
• G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
• G31 Standard Practice for Laboratory Immersion Corrosion Testing of Metals
• G32 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
• G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
• G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
• G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
• G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
• G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
• G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
• G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
• G40 Standard Terminology Relating to Wear and Erosion
• G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
• G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
• G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution
• G46 Standard Guide for Examination and Evaluation of Pitting Corrosion
• G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
• G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
• G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
• G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
• G51 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
• G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
• G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials
• G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons
• G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
• G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
• G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
• G60 Standard Practice for Conducting Cyclic Humidity Exposures
• G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
• G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
• G63 Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
• G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
• G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
• G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
• G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
• G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
• G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
• G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
• G72 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
• G73 Standard Practice for Liquid Impingement Erosion Testing
• G74 Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
• G75 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
• G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
• G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
• G78 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
• G80 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
• G81 Standard Test Method for Jaw Crusher Gouging Abrasion Test
• G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
• G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
• G85 Standard Practice for Modified Salt Spray (Fog) Testing
• G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
• G87 Standard Practice for Conducting Moist SO2 Tests
• G88 Standard Guide for Designing Systems for Oxygen Service
• G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
• G91 Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
• G92 Standard Practice for Characterization of Atmospheric Test Sites
• G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
• G94 Standard Guide for Evaluating Metals for Oxygen Service
• G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
• G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
• G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
• G98 Standard Test Method for Galling Resistance of Materials
• G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
• G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
• G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
• G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
• G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
• G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
• G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
• G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input
• G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
• G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
• G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
• G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both
• G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
• G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
• G114 Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
• G115 Standard Guide for Measuring and Reporting Friction Coefficients
• G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
• G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests
• G118 Standard Guide for Recommended Format of Wear Test Data Suitable for Databases
• G119 Standard Guide for Determining Synergism Between Wear and Corrosion
• G120 Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
• G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
• G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
• G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
• G124 Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
• G125 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
• G126 Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
• G127 Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
• G128 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
• G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
• G130 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
• G131 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
• G132 Standard Test Method for Pin Abrasion Testing
• G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
• G134 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
• G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals
• G136 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
• G137 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
• G138 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
• G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
• G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method
• G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
• G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
• G143 Standard Test Method for Measurement of Web/Roller Friction Characteristics
• G144 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
• G145 Standard Guide for Studying Fire Incidents in Oxygen Systems
• G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service
• G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
• G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
• G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
• G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
• G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
• G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
• G156 Standard Practice for Selecting and Characterizing Weathering Reference Materials Used to Monitor Consistency of Conditions in an Exposure Test
• G157 Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries
• G158 Standard Guide for Three Methods of Assessing Buried Steel Tanks
• G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
• G161 Standard Guide for Corrosion-Related Failure Analysis
• G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
• G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
• G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs
• G165 Standard Practice for Determining Rail-to-Earth Resistance
• G166 Standard Guide for Statistical Analysis of Service Life Data
• G167 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
• G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
• G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests
• G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
• G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
• G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
• G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
• G174 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
• G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
• G176 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
• G177 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
• G178 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
• G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
• G180 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
• G181 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
• G182 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
• G183 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
• G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
• G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
• G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
• G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
• G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
• G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation
• G190 Standard Guide for Developing and Selecting Wear Tests
• G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
• G194 Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
• G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
• G196 Standard Test Method for Galling Resistance of Material Couples
• G197 Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
• G199 Standard Guide for Electrochemical Noise Measurement

External links

• List of A ASTM standards
• List of B ASTM standards
• List of C ASTM standards
• List of D ASTM standards
• List of E ASTM standards
• List of F ASTM standards
• List of G ASTM standards