Esky Honey Bee 2

Please assist by contributing to this page!

Introduction The Honey Bee 2 is a second generation remote control hobbyist helicopter capable of 3D acrobatic flight.

Releases In 2007 the EK1H-E016/17A models were released.

Suitability While commonly used by beginners the Honey Bee 2 is mostly suitable for intermediate pilot as 3D aerobatic action and inverted flight is possible.

Specifications - Weight: 470g; (with 1000mAh, 11.1v Li-poly) - Length: 535mm - Main blade stuff: Wooden - Power system: 370 motors - Ready To Fly - Control mode: CCPM SYSTEM - Newest Transmitter: 6 CH with Gyro. Switch, Hov. Pit, Pit. Trim and Simulator Cable Socket - 4 Servos: 8g, 1.3kg/CM, 0.13s/60 - Battery: 11.1v 1000mAh Li-polymer - Receiver: 6 CH - Electronic Speed Control - Rate Gyro

Flight Time Flight time varies with battery type. The standard Li-Po battery provides 10minutes of uninterrupted flight time.

Modifications Common modifications with advantages are listed below Brushless motor - higher torque for acrobatics, less heat, longer flight time.

Criticisms

Comparison with other entry range Helicopters Walkera - http://www Trex - http://www Esky - http://www.twf-sz.com/